Aneh | March 26, 2007 4:08 am |
Kemarin Printerku rewel alias gak mau dibuat ngeprint, gak tahu kenapa? katanya sih suruh matikan dulu trus hidupin lagi, tapi pas dicoba masih gak bisa juga. Aku jadi inget kalau Printer dengan merek CANON itu kalau sudah lama harus diReset. untuk aku ada teman yang tahu dan caranya kayak gini:
Pertama, cabut semua kabel-kabel yang nancep
Kedua, tekan Power jangan dilepaskan, trus tancapkan kabel ke colokan listrik, kalau sudah di tancapkan sekarang tekan tombol Resume (ingat tombol power jangan dilepaskan) baca doa tiga kali trus lepaskan keduanya. Isyaallah printernya udah bisa buat ngeprint lagi.
wah, bagus juga usulnya, tapi gw ada usul juga nih… gimana kalo ke tokonya aja, beli lagi yg baru…hehehehe….(itu mah bukan usul atuh!!!!)
Comment by d2 — March 28, 2007 @ 7:33 pm
salam kenal dr de2 mei gmn printer nya dah bisa jalan lg ya…
Comment by mei — April 2, 2007 @ 2:59 am
Canon Pixma MP150/MP160
1) With the printer powered off but connected to a
power source, press the Power button while pressing
and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button
two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop /
Reset button (regardless of order), the printer will
move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the
Stop/Reset button 4 times, the specified number of
time(s) according to the
function listed in the table below.(Each time the
Stop/Reset button is pressed, the LED lights
alternately in
orange and green, starting with orange.)note: press 4
times for waste ink counter reset.
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
5) Turn off the printer.( it must be turn off)
then turn it on again.
http://indoresetter.blogspot.com
Comment by Jumatio — February 4, 2008 @ 10:55 am